Nextime's Experimental Laboratory

Page 3 of 11

Rasky update: schematic almost complete

Rasky schematic is almost complete,  only the power supply stage and few other things like some leds and some capacitors remain to add, and then will be time to place components and route traces on the PCB.

Few things about …

Rasky update: choosing how to connect the CPLD to RaspberryPI

HEY! don’t forget to support by contributing and/or sharing the Rasky KVM over IP project! thanks!

The Rasky video capture circuit is the harder part of the project from the hardware side, and the one that responsible to all …

Crowdfunding: self-hosted vs third party, why i choose to self host the Rasky campaign

Recently i’ve launched a crowdfunding campaign to fund my Rasky project. Rasky is an Open Source and DIY friendly KVM over IP built on top of the Raspberry PI model 2 board.

Of course, if you like the project and …

When you need a coffee and no capsule…

you can 3d print a capsule adapter!

This is a re-usable capsule for “lavazza point bidose” type machine


3drag/k8200 precise Z axis endstop modification

Another little modification for my 3drag machines: this time the goal is to have a more easy and precise tarature of the Z axis home, so, i modified the endstop regulator. As usual, stl files are on thingiverse and on …

« Older posts Newer posts »

© 2021 Nexlab - by Franco (nextime) Lanza